ST-Link/V2 in-Circuit debugger/Programmer for STM8 and STM32
4.3 (133 items)
Limited Time Sale$25.76 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 209093890 | Release Date | 2026/03/29 | List Price | $17.18 | Model Number | 209093890 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments. Key Features 5 V power supplied by a USB connector USB 2.0 full-speed-compatible interface USB standard A to Mini- B cable SWIM specific features: 1.65 V to 5.5 V application voltage supported on SWIM interface - SWIM low-speed and high-speed modes supported - SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed - SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012) - SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector JTAG/serial wire debugging (SWD) specific features: 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs - JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector - JTAG supported - SWD and serial wire viewer (SWV) communication supported Direct firmware update feature supported (DFU) Status LED which blinks during communication with the PC Operating temperature 0 to 50 °C
- The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families
- The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board
- STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.
- STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments.
- 5 V power supplied by a USB connector
| UPC | 717520032137 |
|---|---|
| Brand | STMicroelectronics |
| Wattage | 50 watts |
| Model Name | ST-LINK V2 |
| Unit Count | 1.00 Count |
| Form Factor | USB device |
| Item Weight | 0.01 Ounces |
| Manufacturer | STMicroelectronics |
| Model Number | ST-LINK/V2 |
| Cooling Method | Air |
| Output Wattage | 500 Watts |
| Item Dimensions | 4 x 3 x 1 inches |
| Mfr Part Number | ST-LINK/V2 |
| Compatible Devices | Personal Computer |
| Connector Quantity | 2 |
| Power Supply Design | USB-powered |
| Maximum Input Voltage | 5.5 Volts (DC) |
| Minimum Input Voltage | 5 Volts |
| Upper Temperature Rating | 50 Degrees Celsius |
| System Bus Connector Type | USB |
| Connector Type Used on Cable | usb |
Bestseller ranking
Single Board Computers
Customers who viewed this product also viewed
Robes
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form