LM08 Handheld LCR Meter Resistance Capacitance Inductance Electronic Component Measurement 18650 Automotive Battery Tester & Combination Line

LM08 LCR MeterFunctional featuresInstructionsFunctional featuresInstructionsMeasurement functionAutomatic/Resistor/Capacitor/Inductor/lmpedance/ electrolytic capacitor/Battery internal resistanceLanguageChinese,EnglishScreen brightness25% 50% 75% 100% adjustableMain parameterL.C,R,Z.SubparameterX, D,Q,, ERSBuzzerOpen and closeEquivalent methodSeries, parallelBridge calibrationShort circuit, open circuitInductance range0~100HBattery life13hCapacitance range0~100000uFBattery type18650/2000mAh lithium batteryResistance range0~20MSpeed gearSlow/Medium/FastTest level0.1V, 0.3V,0.6VBattery internal resistance partVoltage range: 100VHighest accuracy0.3%resistance range:0.1M~200resistance accuracy:0.5%Voltage accuracy:0.2%Measurement speed1second/time, 2 seconds/time,4 seconds/timeData retentionYesOutput impedance100USB chargingYesMaterialABS + TPELow battery promptYesDisplay screen2.8 in TFE screen 320* 240Weight351gTest frequency100Hz/120Hz/1KHz/10KHz/100KHZAutomatic shutdown15 minutes/30 minutes/45 minutes/60 minutes/Closed

• 1) Before using the product, inspect the casing for cracks or plastic damage. Pay special attention to the insulation near the input ports.2) Follow the product manual to select the correct input ports and settings, ensuring measurements are within the specified range. Do not use this product in explosive gas or vapor environments or humid conditions.3) Before measuring batteries, ensure the battery voltage does not exceed the measurement range. Voltages above 36V may cause
• serious injury, so users should take care to avoid electric shock.4) When measuring batteries, pay attention to the polarity and avoid short circuits to prevent sparking or damage.5) Do not use the product with the front or back cover open.6) lf the battery voltage is low, it may affect the
• accuracy of test results - please recharge the device promptly.7) Before LCR measurement, ensure the circuit is not live and discharge capacitors before starting the measurement.8) Use separate input ports for LCR measurements and battery internal resistance measurements. Mixing them may damage the
• instrument.